Posts

Showing posts from November, 2026

Osmotic Blistering Explained: What Causes Gelcoat Blisters and When to Repair Them

Image
The first time an owner sees a scatter of bubbles across the hull at haul-out, the reaction tends to go one of two ways. Either the hull is assumed to be ruined, or someone says not to worry about it and the problem sits for another few years. The better answer is in between: some gelcoat blisters are cosmetic and worth monitoring, and some mean water is working into the laminate. Telling them apart is what matters. How Osmotic Blisters Form Gelcoat and the laminate beneath it act like a semi-permeable membrane. Small water molecules can pass inward, but larger dissolved molecules cannot get back out. Where the laminate has small voids, water collects and reacts with solutes in the resin, creating an acidic solution. More water is drawn in to dilute it, pressure builds, and a blister forms. That process explains two things. A blister is not surface damage, so sanding it flat and painting over it does nothing. And because the pressure keeps building, blistering left alone long enough ca...

How to Pressure Wash a Boat the Right Way: Settings, Soaps, and Mistakes to Avoid

Image
  Regular cleaning is one of the simplest ways to protect a boat's value. Hand washing handles light upkeep, but when salt, algae, and grime build up, a pressure washer gets the job done faster. Used correctly, it removes the buildup that causes long-term damage. Used carelessly, it can cause that damage itself. Here is how Yacht Management recommends approaching it. Prepare the Boat First Before the washer comes on, put away anything that high-pressure water could push around or damage. Remove cushions, canopies, fishing gear, and electronics, and store them somewhere dry. Close sliding doors, windows, hatches, and portholes so water does not end up inside. Gather your supplies ahead of time: the pressure washer, a soft-bristle brush attachment, a biodegradable detergent approved for marine use, and eye protection and gloves. Non-slip footwear matters too, since decks get slick fast. Inspect Before You Wash Look the hull over for cracks, bubbles, and chipping before you start. Hig...